PowerMate Drilling Pin and Sleeve Devices

Certifications and compliances

• Plugs (CCP 30-150A, including CCP3034) hazardous location rated when used with Crouse-Hinds series interlocked receptacles (ex. FSQC, EBBR models)

– Class I, Division 1, Groups B, C, D (excludes 200A)

– Class II, Division 1, Groups F, G (excludes 200A)

• CE marked (excludes RS option and 200A)
• UL standards: UL1682; UL1686; NEMA250; IEC60309-1; IEC60309-2
• CSA standard: CSA 22.2 No. 182.1
• Suited for use with Type P cable, flexible cord and cables rated for extra hard usage
• NEMA 4X

• Lockout plug – OSHA compliant lockout/tagout guarantees plug cannot be inserted into receptacle when maintenance is being performed downstream of power supply
• Fixed safety insulator – plastic barrier between insulator body and metal housing prevents electrical shock and shorts; fixed-in-place design ensures insulator will not be lost or discarded during cable termination process; available on 30, 60, 100 and 150A only
• 8-point diamond cable clamps – eight points of contact around diameter of cable for increased grip and even distribution of pressure ensures cable jacket does not get pinched, eliminating potential for damage to internal conductors
• Split pin contact design – provides nearly 360° of contact at every insertion, ensuring protection against heat rise and eliminating arcing on critical surfaces
• Extended cable range – offers the industry’s largest cable diameter range and is specifically designed, third party tested and certified for use with Type P cable; sealing system utilizes industry standard bushings
• Enhanced nomenclature and nameplate – mechanically attached nameplate increases ease of part configuration identification and ensures critical information is permanently fixed to product
• Spring and threaded cover – each 30, 60, 100 and 150A receptacle comes with both spring cap and threaded cap to provide a variety of cover options; 200A comes with spring cap and wing nuts to ensure environmental sealing
• Combination drive stainless steel hardware – stainless steel external hardware eliminates corrosion on critical components and extends product life, and allows for more than one option for installation tools
• Handle body – thick epoxy powder coating (standard finish on PowerMate products) reduces corrosion and increases life of product; industry standard profile increases ease of plugging and unplugging
• Combination slot and hex mechanical lugs – hex head allows for easy achievement of specified torque value and increases ease of installation by allowing for more than one option for installation tools
• Insulator assemblies – unimpeded, easy access phase and ground terminals make wire termination quick and easy
• Molded-in-place markings for phase/ground and conductor strip lengths reduce installation errors (available on 60, 100 and 150A only)

• Receptacle housing, plug and cord connector bodies – high impact strength copper-free aluminum with epoxy powder coat finish
• Back boxes – cast aluminum
• Insulation – fiberglass-reinforced polyester
• Contacts – naval brass